Rack Mount POE Injector Surge Protector Ethernet

Description

Rack Mount POE Injector Surge Protector

PN: 800-GIGE-POE-APC

Rack Mount POE Injector Surge Protector

GIGE-POE is a POE injector/Extractor with surge protection added. It is used to insert or remove power from an ethernet data line.

However it does not provide the power. The power (or load) must come from and external device. That is what the two terminal green connector is for. You can select which pairs and which polarities you want on the pairs with jumpers.

The pluggable green terminal block is where you connect the external power source or load.

If you already have a POE port that is powering your equipment you should just use our GIGE-APC surge protectors. They pass through whatever power is already there.

http://mccowntech.com/product/rack-mount-ethernet-surge-protector/

The GIGE-POE-APC will block any power that is already on the line and divert that power to the two terminal connector.

Designed to be used with the popular PRM4 and PRM24 1RU Rack Mount Chassis made by APC. We also sell a PRM4 4 slot rack that is Din Rail Mount.

Universal POE Injection or Extraction for any POE circuit. 0-56 Volts AC or DC

Also compatible with the following Trango radios:

Apex Lynx
Apex Orion
Apex Plus
StrataLink 24

Rack Mount GigE POE Injector Surge Protector-Suppressor-Arrestor.

Especially flexible POE Configuration. Jumpers allow any combination of polarity on any and pair. Moreover, up to 1 amp per pair (with high current transformer option) allows almost any POE device to be powered. (.350 amps default per wire max recommended for most RJ45 devices). Therefore if all 8 wires are configured as the same polarity, 4 amps can be conveyed.

(This presumes high current transformer option is selected).

This device will convey power to 802.3af/at devices or extract power from a POE powered circuit. (User must provide appropriate power supply of course). Shielded RJ45 jacks provide grounds to shielded plugs.

Outdoor Mount Version

Features

GigE Ethernet surge suppression
Shielded RJ45 connectors provide a ground to shielded plugs
Ultra fast suppression - typically less than 1.0ps from 0 Volts to BV min
Faster acting than Thyristor and Gas Tube only designs
Bi-Directional TVS provides full protection even during a destructive surge
Lower loss and crosstalk than Thyristor based designs
Ethernet CRC error correction circuit
Ultra fast suppression - typically less than 1.0ps from 0 Volts to BV min
Up to 2.00 amp total (500mA per pair) POE capability (RJ45 limits are 500 mA or less per pair)
Any polarity on any pair - total flexibility

Specifications

Electrical Specifications

Attenuation: 3dB @ 1000Mhz
NEXT Increase:: 0.2dB
Return Loss Decrease:: 0.3dB
Clamping Voltage:: HV Version 69 Volts

Mechanical Specifications

Height:: 1.655 inches
Width:: 3.170 inches
Net Weight:: .35 lbs (.15kg)

Applications

Backhaul radios
Point to point microwave radio powering
Installed at outdoor tower colocation sites
Conveying power over unused Cat5/6 cables
Emergency spare POE
Pulling power from POE circuits
Powering Cameras
Up to 68 volts AC or DC
Note: Does not allow "split pair" powering for devices like Canopy PMP430.

POE Schematic

Application Chart

Application Data

Terms, Conditions and Warranty

Additional information

Weight	0.35 lbs
Dimensions	3.170 × 1.655 in