Rack Mount 100 Mbps Ethernet Surge Protector

0 out of 5

$24.95

Available!

Rack Mount 100 Mbps Ethernet Surge Protector

Overview

Rack Mount 100 Mbps Ethernet Surge Protector

PN: 800-444APC-HV

This Rack Mount 100 Mbps Ethernet Surge Protector  Suppressor is designed to be used with the popular APC surge suppressor 1RU chassis.

It protects the 4 wire data lines separate from the 4 wire POE only lines.

Compatible with Canopy FSK 100 series including sync over power.

This device is designed to protect equipment such as APs and SMs installed in NOCs or other sites where a number of devices are colocated. This device has a higher ethernet breakdown voltage for high RF exposure situations. POE Polarity agnostic, will work on Canopy or UBNT POE voltages and polarities. Grounded shielded RJ45 jacks provide grounds to shielded plugs. Note: This product has data on 4 wires and POE on 4 wires. It is limited to 100 Mbps. If you need GigE, check out our GigE Ethernet surge suppressors.

View all of our innovative surge suppressors.  

Read more at: www.surge-protection.org

Click on the "How to Buy" button (at top of page) for our distributor list. You will receive a better price when buying from our distributors. Frequently they will have stock when this site shows low or no stock. We are also known as: Wireless Beehive, Wireless Beehive Manufacturing and sometimes Beehive Wireless. See us at at Animal Farm during WISPAmerica

Tech Spec

Weight 0.04 lbs
Dimensions 3.2 × 1.76 in

Specifications

Electrical Specifications
Attenuation
3dB @ 100Mhz
NEXT Increase:
0.5dB
Return Loss Decrease:
0.5dB
Clamping Voltage:
Data Circuits – 69 Volts
Clamping Voltage:
POE – 69 Volts
Mechanical Specifications
Height:
1.76 inches
Width:
3.2
Net Weight:
0.039 lbs
POE Voltage:
10-48 VDC Pins 4,5 and 7,8

Features & Applications

Features

  • Voltage LEDs prove power supply is on
  • Surge circuit custom designed specifically for WISP POE devices
  • High-Speed Ethernet surge suppression design with higher clamp voltages for strong RF immunity
  • Bi-Directional TVS provides full protection even during a destructive surge
  • Fits the APC PRM24 and PRM4 line of chassis for replaceable data line surge protection
  • Shielded RJ45 connectors provide a ground to shielded plugs
  • Ultra fast suppression – typically less than 1.0ps from 0 Volts to BV min
  • NOTE: PINS 4&5 AS WELL AS PINS 7&8 ARE BONDED TOGETHER. THIS MAKES IT UNSUITABLE FOR CANOPY 430 APs.

Applications

  • Installed at large colocation sites such as a NOC
  • Prevent damage to the AP and the other NOC equipment
  • LEDs helps personnell verifiy POE voltage
  • Suitable for sites with high power (100 watts and over) RF exposure to the CAT5.

Downloads & Links

Application Chart

Application Data

Schematic

Terms, Conditions and Warranty

Reviews

There are no reviews yet.

Be the first to review “Rack Mount 100 Mbps Ethernet Surge Protector”

Your email address will not be published.