In Line POE Fuse for CAT 5/6

0 out of 5

$27.95

Available!

In Line POE Fuse for CAT 5/6

Overview

PN: 800-POE-FUSE

POE Fuse – In Line

In – Line POE FUSE APC is designed to fit connect in series with CAT5/6 cables.

Protects the POE power supply such as switches from being blown due to over current situations.  Some of the better POE switches that have multiple voltage and current output options do not survive having a CAT5 cable cut or a connected device malfunction shorting out the Ethernet cable.  The MTC POE fuse products provide fast acting fuses on each individual wire of the CAT 5 cable to prevent damage to the powering device.  It also prevents surges from back feeding into the POE power supply.

Protects the POE supply from surge protection devices and idiots:

Surge suppressors are doing their job properly in clamping the CAT 5/6 conductors to ground during surge impulses.  A problem that has arisen with the widespread use of GIGE surge suppressors in that they do their job too well.  If a surge triggers the surge suppressor, it clamps all the conductors to ground.  Since they are all connected to ground they are also all connected to each other.  That is the definition of a short circuit.  If the circuit is powered with a POE device, it is shorted our every time the surge suppressor is doing its job.  In some cases the surge suppressor is the thing causing damage due to this condition.

Many POE devices also contain ESD and surge suppression components to protect their own circuitry.  During a surge condition the POE powered device may also short the incoming CAT5/6 cable.  Thus blowing the power supply.  The POE FUSE will protect both the device and the power supply from damage under these conditions.

Must be installed between POE supply and the surge suppressor device to properly protect the supply.

Fuses are in line (in series)  with pins/wires 1,2 and 4,5 which are generally the positive wires of a POE circuit.  The LEDs are on 2&5 one one side and 1&4 on the other side.  The colors of the LEDs can be Green or Red, and the color of the LED has no meaning.   If all 4 wires are energized, 4 leds should be showing.  If only 2 or fewer LED are illuminated then generally a fuse is blown or you are powering only two pair of the 4 pair CAT5.   High inrush currents on some equipment will blow the fuses which make them unsuitable in some situations.

Read more at: www.surge-protection.org

Click on the "How to Buy" button (at top of page) for our distributor list. You will receive a better price when buying from our distributors. Frequently they will have stock when this site shows low or no stock. We are also known as: Wireless Beehive, Wireless Beehive Manufacturing and sometimes Beehive Wireless. See us at at Animal Farm during WISPAmerica

Tech Spec

Weight .5 lbs
Dimensions 6 × 6 × 6 in

One 500 mA slow blow fuse per wire (1/2 & 3/6), up to 2 amps per CAT 5/6 cable if all 8 wires are of the same polarity (this presumes a current return path via an external ground or other return circuit.  Some microwave radios use this powering scheme)

2 amps per CAT 5/6 cable under most commonly found powering schemes.

Features & Applications

One 500 mA fuse per positive wire.

2 Amps per port

 

All POE circuits

All POE supplies

All POE powered devices

Downloads & Links

Terms and Conditions

 

Reviews

There are no reviews yet.

Be the first to review “In Line POE Fuse for CAT 5/6”

Your email address will not be published. Required fields are marked *