Rack Mount 100 Mbps split pair power (PMP 430) Ethernet Surge Protector

0 out of 5

$24.95

Available!

Rack Mount 100 Mbps split pair power (PMP 430) Ethernet Surge Protector

Overview

PN: 800-430APC-HV

Rack Mount 100 Mbps split pair power Ethernet Surge Protector

This MTC Ethernet Surge Suppressor Protector is designed to be used with the APC surge suppressor 1RU chassis.  It is designed to work with POE circuits that split the polarity on pairs.

Designed to be used with the popular   PRM4 and PRM24 1RU Rack Mount Chassis made by APC.  We also sell a PRM4 4 slot rack that is Din Rail Mount.

The circuit is similar to proven and popular 444SS circuit with the addition of the Ethernet CRC error killer circuit. This device protects equipment where a number of devices are colocated. Shielded RJ45 jacks provide grounds to shielded plugs. This device is specifically designed for the POE pinout of the Canopy 430 line of product. Pins 4 & 5 are not bonded together, they have opposite POE polarity, same as pins 7&8. Most 4 pin data POE products bond 4 to 5 and 7 to 8. Make sure this is really what you need before you order it.. See application chart for application details. Note: This product has data on 4 wires and POE on 4 wires. It is limited to 100 Mbps. If you need GigE, check out our GigE Ethernet surge suppressors.

Rack Mount 100 Mbps split pair power Ethernet Surge Protector

See all of our innovative surge suppression and POE Insertion products

Read more at: www.surge-protection.org

Click on the "How to Buy" button (at top of page) for our distributor list. You will receive a better price when buying from our distributors. Frequently they will have stock when this site shows low or no stock. We are also known as: Wireless Beehive, Wireless Beehive Manufacturing and sometimes Beehive Wireless. See us at at Animal Farm during WISPAmerica

Tech Spec

Weight 0.039 lbs
Dimensions 3.2 × 1.76 in

Specifications

Electrical Specifications
Attenuation
3dB @ 100Mhz
NEXT Increase:
0.5dB
Return Loss Decrease:
0.5dB
Clamping Voltage:
Data Circuits – 8 Volts (HV version 69 volts)
Clamping Voltage:
POE – 69 Volts
Mechanical Specifications
Height:
1.76 inches
Width:
3.2 inches
Net Weight:
0.039 lbs
POE Voltage:
10-48 VDC

Features & Applications

Features

  • Voltage LEDs prove power supply is on
  • Surge circuit custom designed specifically for CANOPY 430 POE devices
  • High-Speed Ethernet surge suppression design with low clamp voltages
  • Fits the APC PRM24 and PRM4 line of chassis for replaceable data line surge protection
  • Shielded RJ45 connectors provide a ground to shielded plugs
  • Ultra fast suppression – typically less than 1.0ps from 0 Volts to BV min

Applications

  • Installed at large colocation sites such as a NOC
  • Prevent damage to the AP and the other NOC equipment
  • LEDs helps personnel verify POE voltage
  • Use HV version for sites with high power (100 watts and over) RF exposure to the CAT5.

Downloads & Links

Application Chart

Application Data

Schematic

Terms, Conditions and Warranty

Reviews

There are no reviews yet.

Be the first to review “Rack Mount 100 Mbps split pair power (PMP 430) Ethernet Surge Protector”

Your email address will not be published. Required fields are marked *