Outdoor Tower/Wall Mount 8 Circuit Ethernet Surge Protector

5.00 out of 5

$299.95

Check Distributors

Out of stock

Outdoor Tower/Wall Mount 8 Circuit Ethernet Surge Protector

Overview

PN: 800-GigE-TWR-J-HV

Outdoor Tower/Wall Mount 8 Circuit Ethernet Surge Protector

(Not recommended for Cambium ePMP or 450i APs if running at 1000 Mbps, use our CAT6 Gas Discharge Tube product instead)

Now with an improved wire handling design.

Protect up to 8 CAT5/c circuits with one device.

This MTC Surge Suppressor – This multi line protector is designed for outdoor use.  It is suitable for tower or wall mounting.

This device is designed to protect equipment such as APs and SMs installed at NOCs or tower sites where a number of devices are colocated.

The HV version of this device has a higher ethernet breakdown voltage for high RF exposure and POE situations. The HV is required for POE powered devices. LV Voltage is by special order only.  HV version is the default product. 

Grounded and bonded shielded RJ45 jacks provide grounds to shielded plugs on the J version. The P version (special order only) has 110 style punch down connections.

Individual surge suppression modules can be replaced.

Replacement module

Read more at: www.surge-protection.org

Click on the "How to Buy" button (at top of page) for our distributor list. You will receive a better price when buying from our distributors. Frequently they will have stock when this site shows low or no stock. We are also known as: Wireless Beehive, Wireless Beehive Manufacturing and sometimes Beehive Wireless. See us at at Animal Farm during WISPAmerica

Tech Spec

Weight 8.5 lbs
Dimensions 9 × 12 in

Specifications

Electrical Specifications
Attenuation
1.8dB @ 1000Mhz
NEXT Increase:
0.3dB
Return Loss Decrease:
0.3dB
Clamping Voltage:
Standard Model – 3.8V Long 3.0 V Transverse
Clamping Voltage:
HV Model – 69 Volts
Mechanical Specifications
Height:
12 Inches
Width:
9 Inches
Depth:
4 Inches
Net Weight:
8.5 lbs

Features & Applications

Features

  • Compatible with all types of POE (HV Version)
  • Individual Field Replacable Modules
  • Shielded RJ45 Jacks
  • Gas Discharge Tube Protection
  • Silicon Avalanche Diode Protection
  • POE timing glitch correction – eliminates CRC errors & speed reduction on some timing over POE systems
  • No air Back-Up-Gap (BUG) means extra long life and resistance to insect contamination
  • Ultra Low Capacitance Design – Zero Bandwidth Reduction
  • Internal or External Ground Connection
  • NEMA 4 Enclosure
  • Mounts to Wall or Tower
  • High-Speed Ethernet Surge Suppression Design
  • HV version – higher clamp voltages for strong RF immunity
  • Ultra fast suppression – typically less than 1.0ps from 0 Volts to BV min

Applications

  • Installed at large colocation sites such as a NOC
  • Prevent damage to the AP and the other NOC equipment
  • HV Version Suitable for sites with high power (100 watts and over) RF exposure to the CAT5.
  • GigE-TWR-J-HV = High Voltage Shielded RJ45 Jacks
  • GigE-TWR-P-HV = High Voltage 110 Punch Downs

Downloads & Links

Application Chart

Application Data

Terms, Conditions and Warranty

Schematic

1 review for Outdoor Tower/Wall Mount 8 Circuit Ethernet Surge Protector

  1. 5 out of 5

    Salvadore Bannock

    I installed one of these on the tower and exactly one week later we got hit. One of my competitors on the same tower was totally wiped out. Lost all his radios. I did not lose a single radio. All the surge suppressor modules inside this box were blown up completely so we had to use couplers to get the radios back on the air, but McCown sent out replacement modules overnight and we installed them a few days later. This unit saved us thousands. Good shit.

Add a review

Your email address will not be published. Required fields are marked *